USA ITA ENG
CANDIDATI

Vela

VELA
HYDRAULIC ROLL-PRESS BRAKE
FOR TINSMITHING SHEET THICKNESS: 0.020"–0.059" (0.5–1.5 mm)

THE ROLL-PRESS BRAKE FOR THE SHEET METAL ROOFING SECTOR

ROBUSTNESS AND RELIABILITY

VELA is a synchronized hydraulic roll-press brake featuring a robust three-column structure. The side throat is 29.5" (750 mm), while the central frame depth reaches 39.3" (1,000 mm).
The machine is equipped with three motorized rolls driven by gear motors. All models are fitted with an inverter to prevent roll slippage, ensuring accurate and consistent production of the required profile.
A manual crowning system is integrated into the lower table, providing a fast, precise, and functional solution.

360° Experience

ACCESSORIES AND TECHNOLOGIES AVAILABLE ON VELA ROLL-PRESS BRAKE

WARCOM ENERGY SAVER – WES START & STOP

The WES uses an inverter to adjust motor speed according to the bending phase, reducing energy consumption, oil temperature, and noise levels. Average energy savings reach up to 50%.

Other Warcom Machines for tinsmithing

Area

TINSMITHING PRESS BRAKE

from 80 to 160 tons · from 21.3 to 34.4 ft (from 6,5 to 10,5 m)

Discover more

Request a Quote for a
VELA Roll-Press Brake

REQUEST CATALOGUE

    SUBJECT: Catalog request

    REQUEST QUOTE

      SUBJECT: Quote request

      Frequently Asked Questions

      What's the difference between VELA and AREA?

      VELA is a synchronized hydraulic roll-press brake with a three-column structure, featuring a height-adjustable upper roll and two laterally adjustable lower rolls, designed to produce rolled sheet metal parts.
      AREA is a tinsmithing press brake with a two-column structure, specifically designed for bending sheet metal parts and equipped with an integrated pneumatic hemming die.

      Why does VELA have two throat depths?

      VELA's three-column frame gives it two throat depths: 29.5" (750 mm) at the side frames and 39.3" (1,000 mm) at the center frame. This configuration lets you process parts with larger developed widths within the outer frames.

      What sheet thickness can VELA handle?

      VELA processes sheet from 0.020" to 0.059" (0.5–1.5 mm). Its three-roll forming device has a height-adjustable upper roll and two laterally adjustable lower rolls, with a 1.77" (45 mm) roll diameter and 5.12" (130 mm) between them.

      What working lengths and forces are available for VELA?

      VELA comes in three working lengths, 21.3, 27.9 and 34.4 ft (6.5, 8.5 and 10.5 m), with maximum forces of 66, 88 and 110 US tons (60, 80 and 100 t) respectively. The maximum adjustable ram stroke is 5.9" (150 mm) on every model.

      How does the three-roll forming device work?

      The upper roll adjusts vertically and the two lower rolls adjust laterally; together, their positions set the bend radius of the part. The rolls are 1.77" (45 mm) in diameter, with 5.12" (130 mm) between them, for consistent curved profiles along the full length.