W-POWER S-SERIES
Plasma Cutting Machine
for large formats
REQUEST A QUOTE
REQUEST CATALOGUE
Warcom's Large-Format
Plasma Cutting Solution
for Heavy Fabrication
Modular Structure with Floor-Mounted Rails
The W-POWER S-SERIES is Warcom's plasma cutting solution for large dimensions, built for medium- and heavy-duty fabrication. It is designed as standard for widths above 9.8 ft (3 m), with independent, modular guide rails anchored directly to the floor and set with high-precision leveling and alignment devices. This architecture allows large-format installations with working areas up to 13 × 78 ft (4,000 × 24,000 mm).
Built for Large-Format Fabrication
Extremely rugged gantry, engineered by Warcom specifically for the W-POWER S-SERIES and medium- and heavy-duty fabrication.
CNC mounted on the gantry, so the operator works close to the cutting area and monitors the process in real time.
Independent plate support table, separate from the machine structure, built for heavy loads and doubling as a downdraft table.
Multiple processes, including 3D bevel cutting, oxy-fuel cutting and drilling.
Request a Quote for a W-POWER S-SERIES Plasma Cutter
REQUEST CATALOGUE
REQUEST QUOTE
Frequently Asked Questions
What is the W-POWER S-SERIES used for?
The W-POWER S-SERIES is ideal for heavy-duty metal fabrication and for cutting thick mild steel plate. The standard S-SERIES configuration goes up to 13 × 78 ft (4,000 × 24,000 mm), with independent floor-mounted rails that make large-format installations possible.
Can oxy-fuel, 3D bevel cutting or a drilling unit be added?
Yes. The gantry is designed for 3D bevel cutting and oxy-fuel cutting with single or multiple torches, plus a drilling and tapping unit integrated into the cutting table. When a drilling unit is installed, the M-SERIES is fitted with double heavy-duty guides to handle the added load.
What's the difference between the M-SERIES and S-SERIES?
The S-SERIES is designed for widths above 9.8 ft (3 m) and uses independent, modular guide rails anchored to the floor, with working areas up to 13 × 78 ft (4,000 × 24,000 mm). The M-SERIES has a monolithic frame with an integrated downdraft table and sizes up to 8.2 × 19.6 ft (2,500 × 6,000 mm).
Why is the CNC mounted on the gantry?
On large-format machines, a gantry-mounted CNC console lets the operator work close to the cutting area and monitor the process in real time, without walking the full length of a cutting table that can run up to 78 ft (24 m).
